Assembly

Quick Link Menu

Basket Tube Assembly

The SEAPA Basket Tube has been designed for easy and quick assembly.  The male and female locking mechanism along with the locking pins ensure the tube is safely locked into place. It is recommend to pre warm the baskets particulary with 3mm and 6mm whcih allows the tubes to be easily manipulated. Some Farmers will use a fan heater to blow hot air into the box of basket mesh before assembly. Ensure you are watching the tubes at all times. You do not want to melt them!

Streamline 600 End Cap Assembly

PDF Download for use with Streamline 600 series End Caps with no door, and with door

Download PDF

Premium 600 End Cap Assembly

PDF Download for use with Premium 600 series End Caps with no door, and with door

Download PDF

Premium 800 End Cap Assembly

PDF Download for use with Premium 800 series End Caps with no door, and with door

Download PDF

Seapa Clip Assembly

PDF Download for use with the following Seapa items:

  • Standard Basket Clip – 10.8mm
  • Extended Basket Clip – 9mm Hollow Axle
  • Extended Basket Clip – 10.8mm Hollow Axle
  • Flexi Clip 9mm
  • Flexi Clip 10.8mm
  • Flexi Clip 20mm

Download PDF

Premium End Cap Clip Assembly

Download PDF

Universal Axle Pin & Cross Staking Block 800 Assembly

PDF Download for use with the following Seapa items:

  • Universal Basket Clip 0 deg – 9mm
  • Universal Basket Clip 0 deg – 10.8mm
  • Universal Basket Clip 90 deg – 9mm
  • Universal Basket Clip 90 deg – 10.8mm
  • Cross Staking Block – 800 Swinging
  • Cross Staking Block – 800 Fixed

Download PDF

Cross Staking Block 600 Assembly

Download PDF

Clip Retainer Assembly

The Clip Retainer is used in the SEAPA 600 series 12mm & 20mm 15L baskets. The Clip Retainer is used when aggressive farming conditions with high clip movement occurs. THe clip retainer prevent the clip from disengaging from the spin of the basket, adding an extra security of the basket coming off the line. The Clip Retainer clips in underneath the clip axle in the spine of the basket, retaining the clip should the spine wear out over time.

For ease of assembly, use a flat head screwdriver to engage the clip.

 

Download PDF

High Energy Yoke & Plate Assembly

Download PDF